ASSEMBLY
OM 0336QH-A
22
Installing the Hydraulic Components
(Figure 9)
1.
Apply a few layers of thread
sealant on the male end of the 90
elbows (item 1) and attach each
elbow to the cylinder's hydraulic
(item 2A et 2B). Point the elbows
upward as illustrated on figure 9.
2.
Apply a few layers of thread
sealant on the 3/8" male end of
each hose. Connect the 3/8" end
of the 1/4" x 58" hose (item 9) to
the 90
elbow (item 1) of hydraulic
port 2B. Connect the 3/8" end of
the 1/4" x 64" hose (item 8) to the
90
elbow (item 1) of hydraulic
port 2A.
3.
Apply a few layers of thread
sealant to the 1/4" NPT end of
each hose (items 8 et 9). Install
the dust plugs (item 4) as well as
the female quick couplers (item 7)
to the 1/4" NPT male end of each
hose (item 8 et 9). Attach a red
identification ring (item 5) to the
lower hose (item 2A) and a blue
identification ring (item 6) to the
upper hose (item 2B).
6 4
7
6
5
4
7 5
1
1
2B
2A
11
8
9
10
3
Figure 9
2B
2A
T
RACTORS
B3030 WITH
OR
WITHOUT
C
AB
- B2630
8
9
6
6
7
4
5
5
7
4
3
11
1
1
2B
2A
10
2B
2A
Figure 9
T
RACTORS
B7800 – B3200 - B2710 - B2910
