ASSEMBLY
OM 0336QH-A
20
T
RACTORS
B7800 – B3200 - B2710 - B2910
T
RACTORS
B3030 WITH
C
AB
1
2
3
4
Figure 7
1
2
3
4
Figure 7
8. Figure 7:
Slide the subframe under the
tractor. Lift the nose of the male quick hitch
(item 1) and hook the upper section of the
subframe (item 2) on the tractor bumper
(item 3).
9. Figure 7:
Place the subframe so it presses
completely against the bumber and tighten
the 3/4"NF x 4" lg "T" bolt (item 4) securely.
NOTE
: If the subframe does not press completely
against the bumber, check if there is any
interference between the stopper (fig. 2, item 10)
and the lower portion of the bumper If that's the
case, loosen the 3/4"NF x 4" lg "T" bolt (item 4)
until the interference is eliminated.
IMPORTANT: During the first 20 hours of use,
tighten the 3/4"NF x 4" lg. "T" bolt (fig. 7,
item 4) every 4 hours of use. After that, check
for tightness every 20 hours of use.
T
RACTORS
B3030 WITHOUT
C
AB
-
B2630
1
2
3
4
Figure 7
