ASSEMBLY
OM 0336QH-A
26
Reinstalling the Subframe on the Tractor
(Figure 11)
Preparation:
Before installing the subframe, remove the
lawnmower and the front loader from the
tractor by following the instructions in the
operator's manual of the tractor.
IMPORTANT: The subframe and front loader
must never be installed on the tractor at the
same time.
WARNING:
To avoid serious personal
injury: Park the tractor on level ground,
place the transmission in neutral, set the
parking brake, disengage the PTO, place all
control levers in neutral, shut off the engine,
remove the ignition key and allow the
rotating parts to stop BEFORE attaching the
subframe underneath the tractor.
1.
Remove the 1/4" round wire lock pin (item 6)
and the
15/16 x 10 3/8" "L" pin (item 5) from
the B2791A subframe.
2.
Raise the nose of the male quick hitch
(item 1) and hook the upper section of the
subframe (item 2) on the tractor bumber
(item 3).
1
4
2
3
5
7
6
T
RACTORS
B3030 WITH
OR
WITHOUT
C
AB
-
B2630
Figure 11
1
2
3
4
5 6
7
T
RACTORS
B7800 – B3200 - B2710 - B2910
Figure 11
