KTM 690 LC4 2007, Repair Manual

Page: 25 / 95

– Remove the two screws
1
.
– Loosen the cylinder head screws
2
(A/F 14 mm or AH 8 mm) in a
crosswise direction and remove.
NOTE: always replace the cylinder head screws.
– Lift off the cylinder head.
– Remove the cylinder head gasket
3
and discard.
– Remove the screw
4
.
– Carefully pull the cylinder up, hold the piston and remove the
cylinder.
– Remove the piston bolt lock
5
with a suitable tool and slide the
piston bolt
6
out of the piston, holding on to the piston.
NOTE:
– Push the piston bolt out with your finger, do not use a tool.
– If you plan to use the piston again, it is advisable to remove the lock
ring on the clutch end.
– Lift off the cylinder base gasket and discard.
4-6
Repair manual KTM 690 LC4
Art.-No. 3.206.045-E
3
4
5
6
2
2
2
2
1
1