KTM 690 LC4 2007, Repair Manual

Page: 65 / 95

6-8
Repair manual KTM 690 LC4
Art.-No. 3.206.045-E
– Place the half disks
1
in the groove of the input shaft.
– Slide on the stepped disk
2
.
– Slide the clutch disks for the anti-hopping clutch in the outer clutch
hub with special tool 750.29.033.000.
– Mount the disk package in the outer clutch hub, turning the
transmission shafts to help it engage.
NOTE: make sure the upper clutch disk is offset by one meshing.
– Hold the primary pinion with special tool 750.29.081.000
3
while
you apply Loctite 243 to the nut (A/F 27 mm, LH thread), mount
and tighten to 100 Nm.
– Mount a new lock washer and screw on the nut.
– Hold the outer clutch hub with special tool 750.29.081.000 while
you tighten the nut (A/F 30 mm) to 100 Nm; bend down the lock
washer.
1
2 2
3