KTM 690 LC4 2007, Repair Manual

Page: 51 / 95

5-18
Repair manual KTM 690 LC4
Art.-No. 3.206.045-E
– Generously lubricate the clutch disks.
– Slide the supporting ring
1
and the spring ring
2
on the outer hub.
NOTE: mount the spring ring with the inner edge
A
resting on the
supporting ring.
– Alternately slip on 8 lining disks and 7 steel disks, finishing with a
lining disk on top.
NOTE: the outer lining disk has a larger inner diameter since it must be
positioned over the spring ring and supporting ring. Mount this lining
disk first.
– Position the clutch springs
3
.
– Slide on the inner hub
4
, matching the marks.
NOTE: the outer hub has a notch
5
at the clutch spring, the arrow
6
on the inner hub must point to the notch.
– Tightly press the two hubs together and have a helper screw on
special tool 750.29.033.000.
! CAUTION !
D
O NOT TIGHTEN WITH A TOOL
.
NOTE: tighten special tool 750.29.033.000 just enough to allow the
clutch disks to be turned since they must be aligned when mounted in
the outer clutch hub.
– Align the lining disks with the outer clutch hub, turning the upper
disk one space.
2
1
A
3
4
5
6