CONFIDENTIAL - This document is the property of K.T.C. S.r.l. and cannot be reproduced or issued to third parties without written
authorization. K.T.C. shall safeguard its rights to the full extent of the law.
OPERATION AND INSTALLATION MANUAL
COD. 091003 - KME 18-22-30-37 - REV. 07 - DATA 11/2016
pag.56 of 68
8.1.4
REPLACING THE OIL FILTER
Perform all maintenance as described in this manual or following the indications provided by the
retailer or Authorized Service Centre. Open the rear panel and remove the filter cartridge using the
special spanner. Then replace the spent cartridge with a new one.
Before screwing down the filter cartridge, oil the gasket.
Manually screw down the new cartridge.
Figure 17
8.1.5
REPLACING THE OIL SEPARATOR FILTER
Replace the oil separator filter after the number of hours indicated in the manual or after checking
its differential pressure. To do so, open the rear panel and remove the filter cartridge using the
special spanner. Then replace the spent cartridge with a new one.
Before screwing down the oil separator cartridge, oil the gasket.
Manually screw down the new cartridge.
Figure 18
