CONFIDENTIAL - This document is the property of K.T.C. S.r.l. and cannot be reproduced or issued to third parties without written
authorization. K.T.C. shall safeguard its rights to the full extent of the law.
OPERATION AND INSTALLATION MANUAL
COD. 091003 - KME 18-22-30-37 - REV. 07 - DATA 11/2016
pag.14 of 68
3
PRESENTATION OF THE MANUAL: CONTENT AND
CONSULTATION
3.1
SYMBOLS, GLOSSARY AND NOTES ON GRAPHIC LAYOUT
This manual uses symbols to highlight situations that require utmost attention. These symbols can
be located beside a text, a figure or at the top of a page.
Pay utmost attention to the meaning of the symbols: They are used to avoid redundant repetition of
technical concepts or safety warnings and must be considered as “reminders”. Always refer to this
page whenever you have any doubts as to their meaning.
CAUTION: indicates an important note regarding hazardous conditions, safety
warnings, information of primary importance.
MACHINE DOWN: all operations must be performed with the machine down.
CAUTION: MACHINE PRESSURIZED: all operations must be performed with the
machine depressurized, with no pressure in oil separator tank.
UNPLUG: all operations must be performed with the machine unplugged from the
power supply.
QUALIFIED PERSONNEL: all operations indicated with this symbol must be
performed only by specially trained personnel.