CONFIDENTIAL - This document is the property of K.T.C. S.r.l. and cannot be reproduced or issued to third parties without written
authorization. K.T.C. shall safeguard its rights to the full extent of the law.
OPERATION AND INSTALLATION MANUAL
COD. 091003 - KME 18-22-30-37 - REV. 07 - DATA 11/2016
pag.22 of 68
5.7.2
CONNECTING THE POWER SUPPLY CORD OF THE COMPRESSOR
1-
Insert the power supply cord through the cable seal and run it as indicated by the red arrow in
figure 5.
Figure 5
2-
Connect L1 L2 L3 to the disconnecting switch as indicated in figure 6.
Figure 6
