CONFIDENTIAL - This document is the property of K.T.C. S.r.l. and cannot be reproduced or issued to third parties without written
authorization. K.T.C. shall safeguard its rights to the full extent of the law.
OPERATION AND INSTALLATION MANUAL
COD. 091003 - KME 18-22-30-37 - REV. 07 - DATA 11/2016
pag.20 of 68
CAUTION!!
Do not insert any check valves between the compressor and the tank.
The ducting must not exceed 3 metres in length; if this proves necessary, install
a fan on the outlet side (see figure 4).
The ducting must have a uniform section of 0.3 m².
Condensation must not be discharged into the environment or into the sewers.
The well must be fit with a valve and removable container, or it must be
connected to a special unit to separate the air from the water.
Figura 4