CONFIDENTIAL - This document is the property of K.T.C. S.r.l. and cannot be reproduced or issued to third parties without written
authorization. K.T.C. shall safeguard its rights to the full extent of the law.
OPERATION AND INSTALLATION MANUAL
COD. 091003 - KME 18-22-30-37 - REV. 07 - DATA 11/2016
pag.5 of 68
1
GENERAL WARNINGS AND INFORMATION FOR THE USER
1.1
DEFINITION OF REGULATED RELATIONSHIPS
1.1.1
DECLARATIONS
The compressor must be used solely as indicated in this manual. This manual must be kept
on hand in a known, easily accessible place because it should be used throughout the
machine's entire working life.
When making any requests, always indicate model and serial number.
TEST CERTIFICATE
We hereby declare that the compressor has passed testing.
The following checks were performed:
-All parts have been assembled correctly and are functioning properly;
-The unit has passed electrical testing;
-The pressurized parts have passed testing;
-There are no leakages in the oil and air circuits;
-The outside of the machine is not defective;
-The air yield, power consumption and operating temperature parameters are all within normal
ranges.
The Tester
________________
DECLARATION OF CONFORMITY
K.T.C. S.r.l., the manufacturer, on its own responsibility, declares that the air compressor identified
by the label on the front page of this document, complies with the essential requirements laid out in
the following DIRECTIVES – STANDARDS
2009/105/CE - 2014/35/CE – 2006/42/CE – 2014/30/CE - EN60204-1 - EN1012-1
K.T.C. S.r.l. holds the relevant technical dossier.