CONFIDENTIAL - This document is the property of K.T.C. S.r.l. and cannot be reproduced or issued to third parties without written
authorization. K.T.C. shall safeguard its rights to the full extent of the law.
OPERATION AND INSTALLATION MANUAL
COD. 091003 - KME 18-22-30-37 - REV. 07 - DATA 11/2016
pag.50 of 68
7-To reduce belt tension, loosen nut (7) and tighten nut (8).
To increase belt tension, loosen nut (8) and tighten nut (7) and, once the desired tension has been
achieved, close nut (8).
CAUTION!
TO REPLACE THE BELT, LOOSEN NUT (7), MANUALLY GRIP THE SIDES OF
THE BELT, RAISE THE MOTOR ALL THE WAY AND LOCK IT IN PLACE
WITH THE SCREWS (5).
WITHDRAW THE BELT FROM THE PULLEYS AND REPLACE IT.
THEN, LOOSEN SCREWS (5) AND TIGHTEN THE BELT AS INDICATED AT
POINT 4.