Copyright © 1997-2009 KT&C Co., Ltd. All Rights Reserved.
Korea Technology & Communications Co., Ltd.
5
KVS-1000 User’s Manual
Product Description
Description and function
1.
Network LED
– Network LED indicates network connection status.
2.
Status LED
– Status LED indicates Video Server operation status.
3.
75 ohm Switch
– If the video source is to be connected in parallel with other equipment
using a BNC T connector, disable the input termination by setting the 75 ohm switch to OFF.
Failure to do so may cause reduced image quality.
4.
Video In
– Connect a 75 ohm coaxial video cable.
5.
Line / MIC In
– Connect 3.5mm jack from line level audio source or MIC.
6.
Line Out
– Connect 3.5mm jack from speaker.
7.
SD/SDHC Memory Slot
– Insert SD or SDHC memory card for recording videos and saving
images. (Maximum 16GB support)
8.
Power Input
– Connect DC 12V power. (DC 12V 1A)
9.
Reset Switch
– Push the reset button more than 5 second to reset the Video Server when the
Video Server has a problem.
Caution:
This feature will reset all setting values to the original factory default settings.
10.
Power Out
– The video server can supply power to an analog camera or auxiliary equipment.
Caution:
Maximum deliverable power:
12V DC, max. 5W (420mA) if powered by PoE.
Remained power after consumed by the video server itself, if powered by the external DC power adaptor.
(E.g. max. 7W power for external camera can be delivered if powered by 10W DC adaptor, because the
video server consumes power of 3W)
11.
Digital Input
– Connect signal from external sensor.
12.
Digital Output
– Connect signal to external alarm. (Max. current - DC 12V, 40mA)
13.
RS-485
– Connect signal to RS-485 of camera for using PTZ control.
14.
Network Connector
– The Video Server connects to the network via a standard network
cable, and automatically detects the speed of the local network segment (10BaseT/100BaseTX
Ethernet). PoE Supported.
15.
PoE Class Switch
– Setting PoE Class.
Note:
Power over Ethernet (IEEE 802.3af), selectable power classification:
Class 2 – no camera connected or a connected analog camera with power consumption up to 1.4W.
Class 3 – connected analog camera with power consumption up to 5W.