KT&C KVS-1000 User Manual Download Page 60

Page: 60 / 72

Korea Technology & Communications Co., Ltd.

KVS-1000 User’s Manual

Advanced > PTZ > Preset Setting

This section describes how to create the preset position. A preset position is a pre-defined camera
view than can be used to quickly move the camera to a specific location.

Live Screen



This screen displays the live video image and user can configure preset position as
desired.

PTZ Control



Using the Pan, Tilt and Zoom (PTZ) controls, move the camera view to the required
position.

Preset Setting

Use the Pan, Tilt and Zoom control to steer the camera to the required position.

Select the preset number on the drop-down list.

Enter a descriptive preset name.

Press the set button to create new preset on the preset list.

Note:

A total of 100 preset positions can be configured.

Summary of Contents for KVS-1000







































































Search results

Summary of Contents for KVS-1000

Reviews:

Related manuals for KVS-1000

Brands by name

Popular brands

KT&C KVS-1000, User Manual

Search results

Summary of Contents for KVS-1000

Reviews:

Related manuals for KVS-1000

Brands by name

Popular brands