Copyright © 1997-2009 KT&C Co., Ltd. All Rights Reserved.
Korea Technology & Communications Co., Ltd.
63
KVS-1000 User’s Manual
Maintenance > Initialize & Upgrade
This section describes how to reset the Video Server and upgrade the firmware.
1.
Initialize
A.
Reboot – Reboot the Network Camera.
B.
Restore – Reset all setting values, except network setting values.
C.
Factory Default – Reset all setting values to the original factory settings.
Important:
The Default button should be used with caution. Pressing this will return all settings to the factory
default values, which also means that the IP address will need to be set again to make the unit accessible.
2.
Backup, Restore
A.
Backup – Click the backup button to make a backup of all of the setting values in
the Network Camera.
B.
Restore – If it is necessary to restore the camera to previous backed up settings, click
the browse button to locate the saved backup file and then click the restore button.
3.
Upgrade
Upgrade new firmware for the Network Camera. The latest firmware release can be
downloaded from the KT&C website (
http://www.ktncusa.com)
A.
Upgrade – To upgrade the firmware for the Network Camera, click the browse button
to find the firmware file and then click the upgrade button.