Copyright © 1997-2009 KT&C Co., Ltd. All Rights Reserved.
Korea Technology & Communications Co., Ltd.
31
KVS-1000 User’s Manual
1.
Enter a descriptive event name.
2.
Select the enable.
3.
Select the trigger type to sensor in.
4.
Select the input condition
A.
Active – Event will trigger when the input condition is active.
B.
Inactive – Event will trigger when the input condition is inactive.
C.
Change – Event will trigger when input condition is changed.
5.
Select the action type to upload image.
6.
Select the upload type to FTP.
7.
Select the FTP server that receives uploaded image files.
8.
Select the image frequency. (frame per second)
9.
Select the pre-trigger buffer.
10.
Select the post-trigger buffer.
11.
Enter a descriptive image name.
12.
Select the suffix of image name.
13.
Select the schedule by a day of the week.
14.
Enter the start time in a 24hour format.
15.
Enter the end time in a 24hour format.
16.
Click the Add button to add configuration on the event list.
17.
Click the Save button to save configuration.
Note:
Pre-trigger buffer - A pre-trigger buffer contains images/video from the time immediately preceding the
trigger. These are stored internally in the camera. This buffer can be very useful when checking to see what caused
the trigger.
Post-trigger buffer - This function is the counterpart to the pre-trigger buffer described above and contains
images/video from the time immediately after the trigger.
Important:
Image frequency and Pre-trigger buffer can be changed depending on the settings of JPEG frame rate.
