- 76 -
Your router has to be set up to forward port 90 to the stoker’s IP address. (should be done by an IT-skilled
person).
Setup internet connection:
1.
Go to Menu / Service / Konfig / IP.
2.
Enter the stoker’s given IP address.
3.
Enter Sub mask address.
4.
Enter Gateway address.
5.
Enter DNS address.
(8.8.8.8 google dns, can be used)
6.
Enter the wanted password
7.
Enter the Port no, that is setup in the router. (90)
When everything is entered, please restart the controller and it is ready to use.
To check if the LAN connection is running correct, the watch down in the right side of the screen, shall
show date and time correctly.
To connect to the stoker via the internet you have to write the IP address in the browser
http://ekstern
ip:port nr.
Example
http://91.192.212.66:90
With special setups it is the stoker’s intern IP address which is used. However this is only for IT
specialist.