- 16 -
4.2 Pushbuttons.
The panel is equipped with three pushbuttons which changes indications depending on where you are in
the program.
When the boiler is in the normal run screen the designations are as follows:
“START”
“STOP”
“MENU”
“START”: Activates the stoker screw as long as the button is pushed. If you push a little longer the
whole system will start, if it is in stop.
“STOP”:
A short push and the stoker screw will stop (the LED turns red). If you push a little longer
the whole system will shut down.
“MENU”
With this button the menu is activated and here it is possible for you to make your desired
adjustments. If you have had an alarm it will write “BACK” above the menu button. Please press
“BACK” to leave the alarm.
When you enter menu the buttons has replaced indications to:
“UP”
“DOWN”
“PLEASE SELECT”
With the “UP” and “DOWN” you can scroll to your desired adjustment. To make the adjustment please
push the “SELECT” button.
In the selected parameter the indications turn to:
“+”
“-“
“SAVE”
And at last when you have saved the indications will turn to:
“UP”
“DOWN”
“BACK”
It means that it is the same three buttons which has a lot of different functions.