- 18 -
6.0 Shut down the boiler
Before the boiler goes into pause mode or stop after the “Stop” button have been presses, there is 2
parameters that have to be full filled.
9.
The empty run time, have to be run out.
10.
The O
2
level have to be higher than the limit.
The empty run timer is only used if you run the boiler with the ignition type “Auto w. empty”
In all other case the empty run timer has to be 0.
If the “Stop” button are going to pressed again while the boiler are in “Shut down” the boiler will stop
immediately.