- 14 -
4.0 Control Panel
The PCT400 control from KSM-Stoker A/S is a full modulating O
2
controller with integrated PID
regulator.
The PID regulator, will on normal condition always adjust the boiler output to fit the demand from the
heating system.
If the demand is so low, that it exceeds the lowest output for the boiler, the boiler will go into pause
mode, or if it is equipped with automatic ignition, stop and wait until there is a demand again.
The controller is equipped with a colour-monitor, and have its own Web-server which gives the perfect
opportunity to fully monitor and operate the boiler, when it is connected to the internet, with every kind
of hardware which has access to the internet, smartphones, tablet or PC can all be used.
4.1 Display.
On the screen-picture, it is obviously illustrated with a green LED when the single parts are activated and
if you stop the stoker screw the LED turns red.
Bellow two screens are illustrated with an explanation of every single information.
Boiler set. Temp
Actual Temp.
Smoke Temp.
O2 value
Boiler status
Output
Cycles time which
Running time for
tells when the stoker screw the stoker screw
is running again