KSB AMTRONIC R1300, User Instructions

Page: 6 / 36

6
AMTRONIC R1300
I - Introduction
I -- 1 General
The AMTRONIC is especially suited to any ¼ turn VDI/VDE 3845 pneumatic actuator in particular the ACTAIR 3 to 200
series and DYNACTAIR 1.5 to 100 thanks to direct pneumatic distribution (without piping).
Command control functions
All versions of this box include the following electrical and pneumatic functions:
- On/off position detection using switches or proximity detectors,
- Pneumatic distribution by built in electro distributor (4 ports/2 positions or 4/ports/3 positions),
- Adjustment of open and close operating time, by air flow limiter on the exhaust.
Different options can be mounted on the unit and are included in this notice.
I - 2 Technical characteristics
Environment
Standard protection class IP 67 according to EN 60529
Electromagnetic Compatibility Complies with European directive CEM 2004/108/EC in accordance with NF
EN 61000- 6- 2 and NF EN 61000- 6- 4
Climatic class - Storage temperature: - 30 ° C to + 80 ° C
- Working temperature: - 20 ° C to + 80 ° C
Vibrations - According to IEC 68- 2- 6 Test Fc
Box
Material PC 20% Fiberglass
Position signaling By visible pointer on the cover
Pneumatic connection 2 times 1/4” gas
Electric connection - by 2 M20 metallic or plastic cable glands for cable ø 6 to 12 mm,
- by 1 M12 5 pin female connector and a male connector
- by 2 Quick- On connectors
Internal connectors - Length to be stripped : 7 mm
- Cross- section of rigid or flexible conductor: 0.14mm
2
to 1.5 mm
2
- Cross- section of flexible conductor with end connector without insulating
entry cone: 0.25 mm
2
to 1.5 mm
2
- Cross- section of flexible conductor with end connector with insulating
entry cone: 0.25 mm
2
to 0.5 mm
2
Weight 1,70 Kg
Pneumatic distribution
Pressure connection Port 1/4” gas marked ”P” equipped with an internal filter
Exhaust connection Port 1/4” gas marked ”E” equipped with a silencer or connectable to exhaust
network
Operating pressure 3 to 8 bar (44 to 115 psi)
Filtration level ISO 8573-1 (2001) classe 7 (< 40

m)
Dew point ISO 8573-1 (2001) classe 5 (<7
°
C and in all cases <5
°
C at ambient temperature)
Lubrication ISO 8573-1 (1991) classe 5 (< 25mg/m
3
)
Maximum flow rate 400 Nl/min
Consumption when idle none
Dimensions (mm)
F
153 97
View from F
51
122
69