KSB AMTRONIC R1300, User Instructions

Page: 13 / 36

13
AMTRONIC R1300
- Distributor monostable
Actuator
Safety position on loss of current
Plate A Plate B
ACTAIR 3 to 200 (End-stops on closing) Closing Opening
ACTAIR NG 2 to 160 (End-stops on closing Closing Closing
ACTAIR 3 to 200 (End-stops on opening) Opening Closing
ACTAIR NG 2 to 160 (End-stops on opening) Opening Closing
DYNACTAIR 1.5 to 25 (Air fail close) Closing
DYNACTAIR 1.5 to 25 (Air fail open) Opening
DYNACTAIR 50 and 100 (Air fail close) Closing
DYNACTAIR NG 1 to 80 (Air fail close) Closing
DYNACTAIR 50 and 100 (Air fail open) Opening
DYNACTAIR NG 1 to 80 (Air fail open) Opening
Other actuator: plate A
- Distributor bistable
Always plate A
In case of power failure, the box remains in the last commanded position (open or closed).
- Distributor 4/3 center closed
Always plate B
The safety position in case of power failure is defined by the type of solenoid valve NO (Normally Open) or NC
(normally closed).
Safety position on loss of current
Actuator
EV1 (NC)
EV2 (NC) EV1 (NO)
EV2 (NC) EV1 (NC)
EV2 (NO)
ACTAIR 3 to 200 (End-stops on closing) STOP Closing Opening
ACTAIR NG 2 to 160 (End-stops on closing) STOP Closing Opening
ACTAIR 3 to 200 (End-stops on opening) STOP Opening Closing
ACTAIR NG 2 to 160 (End-stops on opening) STOP Opening Closing
DYNACTAIR 1.5 to 25 (Air fail close) STOP Closing Opening
DYNACTAIR 1.5 to 25 (Air fail open) STOP Opening Closing
DYNACTAIR 50 and 100 (Air fail close) STOP Opening Closing
DYNACTAIR NG 1 to 80 (Air fail close) STOP Opening Closing
DYNACTAIR 50 and 100 (Air fail open) STOP Closing Opening
DYNACTAIR NG 1 to 80 (Air fail open) STOP Closing Opening