KSB AMTRONIC R1300, User Instructions

Page: 12 / 36

12
AMTRONIC R1300
III - Assembling the AMTRONIC R1300/Actuator assembly on the valve
Use of an angle sensor with no mechanical stops makes it easier to assemble the positioner on the valve.
You must carry out a complete opening/closing cycle to the actuator mechanical stops to ensure that the angle sensor is in the
correct position.
Assembly N
Assembly M
Pipe
Valve
Valve
Actuator + Amtronic
Pipe
Actuator + Amtronic
IV - Safety position on loss of current
The safety position on loss of current of the AMTRONIC is configured in the factory according to the order.
It can be modified by changing the distribution plate (Plate A or B) or by changing the type of the solenoid
valves 4/3 center closed.
Position of the plate A or B
Plate A
The 2 plate types
Plate B
Depending on the plate used (A or B) and depending on the actuator size, we obtain different safety positions on loss of
current.