R E P A I R
R E P A I R
This chapter contains special security and assembling notes.
Tools and repair accessories
With the following tools, all described repair work can be done:
Repair work without disassembling the machine
Without disassembling the machine, the following parts can be replaced:
•
water tank
•
capsule holder
•
injector plate
•
drip tray and drip grid
•
capsule bin with bin grid
Non-observance
can lead to injuries
and damages!
A pin-torx screw
head looks like this:
Tool
Application
Torx screwdriver for security screws, PinTX 10 Housing back screw connections
Torx screwdriver for TX 30
Thermoblock screw connection
Phillips screwdriver no. 1 and 2
Main PCB screw connection
Screwdriver with 4 mm width
Open latches and snap connections
Pointed pliers
NTC temperature sensor
Flat nose pliers
Flat receptacles, hose clips, filter element of
water tank connector
Fork wrench no. 8
Fork wrench no. 12
Adjustable pump connector
Cutter (stanley knife)
Pressure hoses
Small hammer
Clamp spring (NTC temperature sensor)
Piercer
Clamp spring (NTC temperature sensor)
Heat conducting paste
NTC temperature sensor
