R E P A I R
Replacing pump
1. Remove housing left and spacer left first.
2. Unplug flat receptacle (S) from pump (T).
3. Unplug pump wire (U) from main pcb.
4. Remove silicone elbow (V) from pump.
5. Remove pressure hose (W) with clip from Tpiece of extraction head.
Depending on sup-
plier, the body of
the pump can have 3 dif-
ferent colors.
The flat receptacles have a special connector latching.
Press down lever at first, then pull receptacle.
The pressure hose
and clip have to be
discarded together with
the defect pump.
Always use new clips for pressure hose assembly.
