R E P A I R
Removing housing front
4. Disconnect cable plug (E) of cup lighting on front of machine (two different wiring
versions depending on manufacturing date).
5. At the back of machine:
Push housing front (F) to the front with your thumbs. In case of problems open 2
latches on each side of housing front (F) with the help of a screwdriver.
6. Push in housing front at the top to loosen remaining latch.
7. Remove housing front.
Risk of damage if
cable plug is not
disconnected.
The water tank
connector and the
cup lighting can be
replaced now with this
partial disassembly.