O P E R A T I N G
O P E R A T I N G
Machine status
After switching on, an automatic selftest is performed to check if the
capsule holder is inserted (with reedswitch)
NTC is connected,
NTC is short circuited,
the thermoblock reaches the working temperature in about 30 seconds.
Operating modes and detected failures are indicated by LED signals of the power button
as listed in the following table:
Operating modes
Power button
LED signals
Economy mode / Off
—
Heating up / selftest
red, blinking, approx. 30 sec.
Ready
green, steady
After beverage preparation (cool
down time)
red, blinking, approx. 5 sec.
Descaling ready and during des
caling cycle
green, slow blinking
Error mode
red, rapid blinking
