R E P A I R
General disassembly
The general disassembly
makes important components accessible for repair or replacement,
is required for the leakage check.
Safety information
•
Empty the fluid system before repair (if possible) and shipment (see see page 18).
•
The housing back is assembled with special safety screws. Please insert the same
screws when reassembling the machine for safety reasons for the user.
•
With each repair
always accomplish internal cleaning
renew all pressure hoses and clips when disassembled.
•
Handle snap connections and latches with care to avoid any damage.
•
If it is necessary to cut or pull off hoses, hold a towel ready to wipe away leaking water.
Preparation for disassembly
1. Remove water tank (A), capsule holder (B) and drip tray (C) together with drip grid.
General disassem-
bly is presented as
step by step instruction.
Pay attention to the
sequence of disassembly
steps, e.g. housing front
cannot be removed
before housing back is
unscrewed.
W A R NI NG
Danger of electric shock live parts inside coffee machine.
Unplug from the mains before disassembling the machine
appliance must be isolated!
Every time a pressure hose or a clip is disconnected, it must be replaced
by a new one.
Unplug machine
from the mains
before disassembling -
appliance must be
isolated!
