Kruger Ecowatt Drive K120 Series, Operation Manual

Page: 78 / 173

Ecowatt ® Drive K120 series Function parameter list
-71-
Function
code
Name Description Default Modify
The max. frequency of pulse is 50.00kHz. For
details about the related functions, see
P06.27–P06.31.
1: Open collector output. For details about the
related functions, see P06.02.
P06.01 Y1 output 0: Invalid
1: Running
2: Running forward
3: Running reversely
4: Jogging
5: VFD in fault
6: Frequency level detection FDT1
7: Frequency level detection FDT2
8: Frequency reached
9: Running in zero speed
10: Upper limit frequency reached
11: Lower limit frequency reached
12: Ready for running
13: Pre-exciting
14: Overload pre-alarm
15: Underload pre-alarm
16: Simple PLC stage completed
17: Simple PLC cycle completed
18: Set counting value reached
19: Designated counting value reached
20: External fault is valid
21: Length reached
22: Running time reached
23: Modbus communication virtual terminal
output
24–25: Reserved
26: DC bus voltage established
27–30: Reserved
0
○
P06.03 RO1 output 1
○
P06.04 RO2 output 5
○
P06.05
Output
terminal
polarity
selection
The function code is used to set the polarity
of output terminals.
When a bit is 0, the input terminal is positive;
When a bit is 1, the input terminal is negative.
BIT3 BIT2 BIT1 BIT0
RO2 RO1 Reserved Y1
Setting range: 00–0F
00
○