10
Settings
10.1
Adjusting the guide wheels of the pick-up
78
Bellima F 130
Original Operating Instructions 150000148_06_en
10
Settings
WARNING
Risk of injury due to non-observance of relevant safety instructions
If the relevant safety instructions are not observed, persons may be seriously injured or killed.
To avoid accidents, the relevant safety instructions must be read and observed,
WARNING
Risk of injury due to non-observance of safety instructions
If the relevant safety routines are not observed, persons may be seriously injured or killed.
The safety routines must be read and observed to avoid accidents,
.
10.1
Adjusting the guide wheels of the pick-up
RP000-091
The guide wheels (1) must be set so that the lightly touch the ground in the preselected raking
height of the pick-up. Ensure that the setting of the guide wheels (1) is identical on both sides of
the pick-up.
Guide wheels with pneumatic tyres are shown here by way of example. Guide wheels made of
sheet steel must be set in the same way.
Loosen the screw connections (2) and (4).
Set the guide wheel (1) using the oblong hole (3).
INFORMATION
With crops laying very flat on the ground, it may be necessary to have the pick-up run on the
guide wheels only. In this case, the working height is adjusted to the lowest setting.
If the pick-up fails to pick the crops up well even in the lowest working height setting, adjust
the drawbar height,
.
