![Krone Bellima F 130 Original Operating Instructions Download Page 74](http://html1.mh-extra.com/html/krone/bellima-f-130/bellima-f-130_original-operating-instructions_2004784074.webp)
8
Operation
8.17
Removing crop blockages
74
Bellima F 130
Original Operating Instructions 150000148_06_en
8.17
Removing crop blockages
8.17.1
Crop blockage at the right-hand and left-hand end of the pick-up
ü
For the "Hydraulic switching valve" version: The hydraulic switching valve is set to "Bringing
the pick-up to transport/working position",
.
Reverse with the PTO shaft running while repeatedly actuating the control unit in the tractor
(red, 1+) to raise and lower the pick-up.
If this does not remove the crop blockage:
Shut down and safeguard the machine,
.
CAUTION! Risk of injury due to sharp parts! Always wear appropriate protective gloves
when removing crop blockages.
Remove the accumulated crops manually.
8.17.2
Crop blockage in the pick-up
ü
For the "Hydraulic switching valve" version: The hydraulic switching valve is set to "Bringing
the pick-up to transport/working position",
.
Reverse with the PTO shaft running while repeatedly actuating the control unit in the tractor
(red, 1+) to raise and lower the pick-up.
If this does not remove the crop blockage:
Shut down and safeguard the machine,
.
Remove the upper and lower holding-down clamp,
and
Remove the accumulated crops manually.
CAUTION! Risk of injury due to sharp parts! Always wear appropriate protective gloves
when removing crop blockages.
Mount the upper and lower holding-down clamp,
and
.
8.17.3
Crop blockage between pick-up and bale chamber
RPG000-048
Proceed as follows to remove the accumulated crop between pick-up and bale chamber (1):
ü
For the "Hydraulic switching valve" version: The hydraulic switching valve is set to "Bringing
the pick-up to transport/working position",
.
Reverse with the PTO shaft running while repeatedly actuating the control unit in the tractor
(red, 1+) to raise and lower the pick-up.