8
Operation
8.11
Twine tying
66
Bellima F 130
Original Operating Instructions 150000148_06_en
RP000-078
Place the 6 spools of twine (3) in the storage compartment. Make sure that the side marked
with the word "Up" faces up.
Knot the twine as shown in the drawing and the table below.
the beginning of
twine spool
with the end of
twine spool
the beginning of
twine spool
with the end of
twine spool
Twine 1
1.1
1.2
1.2
1.3
Twine 2
2.1
2.2
2.2
2.3
Producing twine 1 and 2
Guide the beginning of the twine spool 1.1/2.1 through the eyelet (1) above and connect it
with the twine end 1.2/2.2 using a reef knot (2).
Guide the beginning of the twine spool 1.2/2.2 through the eyelet (1) above and connect it
with the twine end 1.3/2.3 using a reef knot (2).
Shorten the twine ends of all reef knots (2) to
X=15-20 mm
.
Guide the beginning of the twine spool 1.3/2.3 via the eyelet (1) above it through the twine
guide eye to the twine retainer.
