8
Operation
8.1
Preparation before baling
56
Bellima F 130
Original Operating Instructions 150000148_06_en
8
Operation
WARNING
Risk of injury due to non-observance of relevant safety instructions
If the relevant safety instructions are not observed, persons may be seriously injured or killed.
To avoid accidents, the relevant safety instructions must be read and observed,
WARNING
Risk of injury due to non-observance of safety instructions
If the relevant safety routines are not observed, persons may be seriously injured or killed.
The safety routines must be read and observed to avoid accidents,
.
WARNING
Risk of injury due to unpredictable movement of the round bales when the machine is
operating on a slope
If round bales are deposited on a slope, they may start moving on their own. Once round
bales have started moving, their weight and cylindrical shape may cause serious accidents
and injure people.
On slopes, deposit round bales in manual mode only.
On slopes, always deposit round bales in such a way that they cannot start moving on
their own.
8.1
Preparation before baling
ü
The pick-up is in working position,
.
ü
The holding-down clamp is correctly set for the crops quantity,
ü
The wrapping material is correctly inserted.
Twine tying:
Net wrapping:
ü
The baling pressure is set,
ü
The bale counter is set to 0,
.
8.2
Filling the bale chamber
NOTICE
Risk of damage to the bale formation conveyor due to barrel-shaped round bales
Distorted and compacted round bales may damage the bale formation conveyor. Also, proper
silage production cannot be guaranteed.
Only bale evenly shaped and compressed round bales.
Observe the notices for even filling of the bale chamber.
To attain a consistent bale density inside a round bale, the bale chamber must be filled evenly.
Here, the swath width is important. The swath width is ideal if the swath has exactly the same
width as the bale chamber.
