Machine description
4
Overload protections on the machine
4.2
Bellima F 130
Original Operating Instructions 150000148_06_en
35
5
Drawbar eye
13
Baling pressure indicator
6
Wire rope
14
Tailgate
7
Universal shaft bracket
15
Road lighting
8
Drawbar
16
Bale ejector
4.2
Overload protections on the machine
Universal shaft
As overload protection, the universal shaft is equipped with a friction clutch.
To vent the friction clutches, see
.
4.3
Identification plate
INFORMATION
The entire identification plate represents a legal document and should not be altered or
rendered illegible!
RPG000-007
The machine data are specified on a type plate (1). This is located on the right-hand machine
side in the storage compartment.
Information for enquiries and orders
If you have any further queries on the machine or if you want to order spare parts, always enter
type designation, vehicle identification number and year of manufacture of the corresponding
machine. To ensure that these data are always available, we recommend to enter them in the
fields on the front cover page of these operating instructions.
4.4
Description of the twine tying functionality
The machine is equipped with a storage compartment which is capable of storing 6 rolls of
twine.
To ensure sufficient tying safety, you must be careful only to use synthetic twine that has a
running length of 400-600 m/kg.
INFORMATION
For twine tying, KRONE recommends using KRONE excellent Round Baler Twine. This twine
can be ordered under material number 00 929 949 * (750 m/kg) or 00 929 951 * (1,000 m/kg).
