1
SAFETY INSTRUCTIONS
8
OPTIFLEX 1300 C
www.krohne.com
01/2008 • 4000172301 - HB OPTIFLEX 1300 R02 en
The manufacturer reserves the right to alter the content of its documents, including this
disclaimer in any way, at any time, for any reason, without prior notification, and will not be liable
in any way for possible consequences of such changes.
1.3.2 Product liability and warranty
TDR level transmitters from KROHNE are designed solely for measuring the distance, level,
interface, mass and volume of liquids, pastes, slurries, granulates and powders.
Responsibility as to suitability and intended use of these level transmitters rests solely with the
operator. The supplier does not accept any liability resulting from misuse by the operator.
Improper installation and operation of the level transmitters may lead to loss of warranty. In
addition, the
“
General conditions of sale
“
which forms the basis of the purchase agreement are
applicable.
1.3.3 Information concerning the documentation
To prevent any injury to the user or damage to the device it is essential that you read the
information in this document and observe applicable national standards, safety requirements
and accident prevention regulations.
If this document is not in your native language and if you have any problems understanding the
text, we advise you to contact your local the manufacturer office for assistance. The
manufacturer can not accept responsibility for any damage or injury caused by
misunderstanding of the information in this document.
This document is provided to help you establish operating conditions, which will permit safe and
efficient use of this device. Special considerations and precautions are also described in the
document, which appear in the form of underneath icons.
HB_OPTIFLEX1300_EN_D4_080428.book Page 8 Tuesday, April 29, 2008 2:47 PM
