Krick ro1160, Assembly And Operating Instructions Manual

Page: 43 / 72

Stage 11, deck superstructure fittings, parts 11.1 –
11.25
Part
Description, size in mm Qty. Notes
11.1 Navigation lamps 3
11.2 Throttle lever base 1
11.3 Throttle lever, D 1 2 Brass rod
11.4 Handle 2 Bead
11.5 Ship’s wheel 1
11.6 Self tapping screw, D 2.9 x 9.5 1
11.7 Bar, D 1.5 1 Brass rod
11.8 Deck floodlight 1 3-part
11.9 TV aerial 1
11.10 Radar reflector 1
11.11 Lamp holder, D 1.5 1 Brass rod
11.12 Masthead light 1
11.13 Panoramic light 1
11.14 Aerial base, D 1.5 x 10 1 Tub. Rivet
11.15 Aerial, D 0.8 x 130 1 Steel rod
11.16 Aerial tip 1 Bead
11.17 Aerial base, D 1 x 10 1 Brass rod
11.18 Aerial, D 2 x 4 1
11.19 Screen D 7 1 transparent
11.20 Windscreen wiper 2
11.21 Wiper shaft 2 Brass tube
11.22 Nut, M2.5 1
11.23 Doubler 3 laser cut
11.24 Guide, D 4 x 15 1 Brass tube
11.25 Screw, M 2.5 x 20 1
- Colour two of the navigation lamps 11.1 red and
green, and glue them to the bar 8.5 (red: left, green:
right). Glue the stern light 11.1 in place.
- Apply the self-adhesive cockpit decals.
- Make up the throttle lever from the base 11.2, the
levers 11.3 and the handles 11.4, and glue the
assembly to the model.
- Attach the ship’s wheel 11.5 using the self-tapping
screw 11.6.
- Bend the bar 11.7 to shape and glue it in place.
- If you have not already done so, fix the radar bearer
8.6 to the support permanently using the screws 8.8.
- Glue together the three parts which make up the
deck floodlight 11.8 and attach it to the radar bearer
using the remaining screw 8.8.
- Fix the TV aerial 11.9 and the radar reflector 11.10
to the radar bearer.
- Bend the lamp bearer 11.11 to shape, drill a hole in
the radar reflector 11.10 as shown and glue the
lamp holder in it.
- Glue the panoramic light 11.13 and the masthead
light 11.12 in place.
- Make up the aerials from parts 11.14 – 11.19, drill
holes where shown, and glue the aerials to the
model.
- Fit the windscreen wipers 11.20 on the shafts 11.21.