Kramer VS-62HA, User Manual

Page: 3 / 95

VS-62HA
–
Contents i
Contents
1 Introduction 1
2 Getting Started 2
2.1 Achieving the Best Performance 2
2.2 Safety Instructions 2
2.3 Recycling Kramer Products 3
3 Overview 4
3.1 Using the IR Transmitter 5
3.2 About Fast Switching 5
3.3 Defining the VS-62HA 6x2 HDMI/Audio Matrix Switcher 5
4 Installing in a Rack 10
5 Connecting the VS-62HA 11
5.1 Connecting a Serial Controller to the VS-62HA via RS-232 12
5.2 Connecting to the VS-62HA via Ethernet 13
5.3 Connecting the Remote Contact-Closure Switches and LEDs 16
6 Principles of Operation 18
6.1 Automatic Signal Detection 18
6.2 Input Switching Modes 18
6.3 EDID Operation 19
6.4 Step-in Functionality 19
7 Operating the VS-62HA 6x2 HDMI/Audio Matrix Switcher 20
7.1 Switching an Input to an Output 20
7.2 Switching Analog Audio 20
7.3 Acquiring an EDID from an Output 21
7.4 Using the OFF Button 22
7.5 Locking and Unlocking the Front Panel Buttons 22
7.6 Generating a Test Pattern 23
8 Configuring and Maintaining the VS-62HA 24
8.1 Setting the DIP-Switches 24
8.2 Resetting the VS-62HA to Factory Default Settings 25
8.3 Upgrading the Firmware 25
9 Operating the VS-62HA Remotely via the Web Pages 26
9.1 Video Switching Page 27
9.2 Analog Audio Switching 30
9.3 EDID Management 31
9.4 Authentication Page 34
9.5 Device Setting Page 35
9.6 Firmware Upgrade Page 36
9.7 About Us Page 37
10 Wiring the Twisted Pair RJ-45 Connectors 38
11 Technical Specifications 39
12 Default Communication Parameters 40
13 Default EDID 41
14 Protocol 3000 Syntax 43
14.1 Host Message Format 43
14.2 Device Message Format 43
14.3 Command Terms 44