24
VS-62HA - Configuring and Maintaining the VS-62HA
8
Configuring and Maintaining the VS-62HA
This section describes the configuration and maintenance of the
VS-62HA
and
consists of:
Resetting the device to factory default settings (see
8.1
Setting the DIP-Switches
The Setup DIP-switches dictate the behavior of the
VS-62HA
.
All DIP-switches are off by default.
#
Feature
Description
1
HDCP support on inputs
On
—Disable HDCP support on all inputs
Off
—Enable HDCP support which is defined by P3000
commands
2
Video mode switching
Output 1
On
—Auto
Off
—Manual
3
Last connected/Priority
mode Output 1
When DIP-switch 2 is set to Auto (ON):
On
—Enable Last Connected mode
Off
—Enable Priority mode where the priority of each
input is defined by the input number, (1 is the
highest priority)
4
Video mode switching
Output 2
On
—Auto
Off
—Manual
5
Last connected/Priority
mode Output 2
When DIP-switch 4 is set to Auto (ON):
On
—Enable Last connected mode
Off
—Enable Priority mode where the priority of each
input is defined by the input number, (1 is the
highest priority)
6
N/A
N/A
7
N/A
N/A
8
N/A
N/A
