Kramer VS-62HA, User Manual

Page: 14 / 95

VS-62HA - Overview 9
Figure 2: VS-62HA 6x2 HDMI/Audio Matrix Switcher Rear Panel
# Feature Function
20 AUDIO IN (1-4) 3.5mm Mini Jacks Connect to unbalanced stereo audio sources (1-4)
21 AUDIO IN (5-6) 5-pin Terminal Blocks Connect to balanced stereo audio sources (5-6)
22 AUDIO OUT (1-2) 5-pin Terminal Blocks Connect to balanced stereo audio acceptors (1-2)
23 REMOTE LEDS (1-2) Terminal Blocks Connect to LEDS that display the selected input channel (1-6)
24 REMOTE IR 3.5mm Mini Jack Connect to an external IR receiver for controlling the device via an IR remote
controller (see
Section
‎3.1
).
Covered by a cap. The 3.5mm mini jack at the end of the internal IR connection
cable fits into this opening
25 HDMI IN (1-6) Connectors Connect to HDMI sources (1-6)
26 HDMI OUT (1-2) Connectors Connect to HDMI acceptors (1-2)
27 SETUP DIP-Switches Sets the device configuration (see Section
‎8.1
)
28 REMOTE SWITCHES (1-2) Connect to up to six remote, contact-closure input selection switches for Output 1
and Output 2 (see
Section
‎5.3
)
29 RESET/FACTORY DEFAULT Button Press while power-cycling the device to reset to factory default parameters (see
Section
‎12
)
30 RS-232 3-pin Terminal Block Connect to a PC/serial controller (see Section
‎5.1
)
31 PROGRAM USB Connector Connect to a PC to upgrade the firmware (see Section
‎8.3
)
32 ETHERNET RJ-45 Connector Connect to a PC via a LAN (see Section
‎5.2
)
33 Power Module (Socket, Fuse, On/Off Switch) Connects to mains power and turns the unit on and off
8
VS
-6
2
HA
–
Ov
e
rv
ie
w