VS-62HA - Operating the VS-62HA 6x2 HDMI/Audio Matrix Switcher
21
To change the volume of the selected audio input (HDMI or analog):
Press VOL+ to increase and VOL- to decrease the output volume
To mute the output volume:
Press the MUTE button for the desired output
The button lights and the volume is turned off
Press the MUTE button again for the desired output
The button goes off and the volume is turned on
To exchange audio outputs:
Press SWAP
Audio OUT 1 routes to OUT 2 and audio OUT 2 routes to OUT 1
To return the audio outputs to their normal place, press SWAP again
7.3
Acquiring an EDID from an Output
You can acquire the EDID from OUT 1 or OUT 2 and copy it to any or all of the
six inputs to be stored in non-volatile memory. You can also reset any or all of
the inputs to the default EDID.
To copy the EDID from an Output to one or more Inputs
:
1. Press the EDID button to enter the EDID setting mode.
The EDID button lights.
Note
: If there is no button activity for 10 seconds, the device automatically exits
the EDID setting mode to normal operation, the EDID button no longer lights
and any changes made are lost.
2. From the To OUT 1 (top) row, press each of the Inputs to which you want
to copy the EDID from Output 1.
Each selected Input LED lights.
3. From the To OUT 2 (bottom) row, press each of the Inputs into which you
want to copy the EDID from Output 2.
Each selected Input LED lights.
