Kramer VS-62HA, User Manual

Page: 69 / 95

64 VS-62HA - Protocol 3000 Commands
15.4 Video Commands
Command Description Type Permission
DEF-RES Set/get custom defined scaled video output
resolution to “VIC” index Video Administrator
VID-PATTERN Set/get test pattern on output Video End User
VMUTE Set/get video on output mute Video End User
Command - DEF-RES Command Type - Video
Command Name Permission Transparency
Set DEF-RES Administrator Public
Get DEF-RES? End User Public
Description Syntax
Set:
Set custom defined
scaled video output
resolution to ID index # DEF-RES
␠
Table_id,Width,Height,Htotal,VTotal,HSyncW,HSyncBackPorch,
VSyncW,VSyncBackPorch,FrRate,Interlaced
␍
Get:
Get custom defined video
resolution
# DEF-RES?
␠
Table_id,stage,stage_id
␍
Response
~ nn@ DEF-RES
␠
Table_id,Width,Height,Htotal,VTotal,HSyncW,HSyncBackPorch,VSyncW,VSyncBackPorch,FrRate,Interlaced
␍␊
Parameters
Table_id - index in resolution table (see Section
‎18.5
Video Port Type )
). Valid indexes for SET are 100-104 only
Custom resolution parameters - by name (self-explanatory), numeric value
Interlaced - interlaced/progressive according to Section
‎18.1 On/Off (“ON”- I, “OFF” - P)
Stage - input/output (see Section
‎18.2 Stage
)
Stage_id - number of chosen stage (1...max number of inputs/outputs)
Response Triggers
After execution, response is sent to the com port from which the Set/Get was received
After execution, response is sent to all com ports if DEF-RES was set by any other external control device
(button press, device menu and similar)
Notes
If a requested custom resolution is not defined, yet is in the device, it returns ERR
␠
003 (out of range)
Only indexes 100-104 are valid for custom defined resolution
In Get command when sending:
index 0 - device replies with detailed info of native resolution
index 255 - device replies with detailed info of current resolution