VS-62HA - Protocol 3000 Commands
55
Command -
DISPLAY?
Command Type - System
Command Name
Permission
Transparency
Set:
-
-
-
Get
DISPLAY?
End User
Public
Description
Syntax
Set:
-
-
Get:
Get output HPD status
#
DISPLAY?
␠
out_id
␍
Response
~ nn@
DISPLAY
␠
out_id,status
␍␊
Parameters
out_id -
output number
status
- HPD status according to signal validation (see
Section
Response Triggers
After execution, response is sent to the com port from which the Get was received
Response is sent after every change in output HPD status ON to OFF
Response is sent after every change in output HPD status OFF to ON and ALL parameters (new EDID,
etc.) are stable and valid
Notes
Command -
HDCP-MOD
Command Type - System
Command Name
Permission
Transparency
Set:
HDCP-MOD
Administrator
Public
Get:
HDCP-MOD?
End User
Public
Description
Syntax
Set:
Set HDCP mode
#
HDCP-MOD
␠
inp_id,mode
␍
Get:
Get HDCP mode
#
HDCP-MOD?
␠
stage_id
␍
Response
Set / Get: ~ nn @
HDCP-MOD
␠
stage_id,mode
␍␊
Parameters
inp_id
- input number (1.. max number of inputs)
mode -
HDCP mode (see
Section
Response Triggers
Response is sent to the com port from which the Set (before execution) / Get command was received
Response is sent to all com ports after execution if HDCP-MOD was set by any other external control
device (button press, device menu and similar) or HDCP mode changed
Notes
Set HDCP working mode on the device input:
HDCP supported - HDCP_ON [default]
HDCP not supported - HDCP OFF
HDCP support changes following detected sink - MIRROR OUTPUT