Kramer VS-62HA User Manual Download Page 41

Page: 41 / 95

VS-62HA - Operating the VS-62HA Remotely via the Web Pages

To modify serial or Ethernet communication parameters:

1. Adjust the parameters as required, either by entering the parameters

directly or by using the drop-down list.

2. Click

Set

The changes are saved.

9.6

Firmware Upgrade Page

The Firmware Upgrade page lets you perform a firmware upgrade from a

firmware file.

Figure 14: The Firmware Upgrade Page

To upgrade the firmware:

1. Click

Choose File

The Windows Browser opens.

2. Browse to the required file.

3. Select the required file and click

Open

The firmware file name is displayed in the Firmware Upgrade page.

4. Click

Start Upgrade

The firmware file is loaded and a progress bar is displayed.

Do not interrupt the process or the

VS-62HA

may be damaged.

5. When the process is complete reboot the device.

The firmware is upgraded.

Summary of Contents for VS-62HA
































































































Search results

Summary of Contents for VS-62HA

Reviews:

Related manuals for VS-62HA

Brands by name

Popular brands

Kramer VS-62HA, User Manual

Search results

Summary of Contents for VS-62HA

Reviews:

Related manuals for VS-62HA

Brands by name

Popular brands