Kramer VS-62HA, User Manual

Page: 77 / 95

72 VS-62HA - Protocol 3000 Commands
15.7 EDID Handling Commands
Command Description Type Permission
CPEDID Copy EDID data from the output to the
input EEPROM EDID Handling
End User
GEDID Set/get EDID data EDID Handling End User
LDEDID Load EDID data EDID Handling End User
Command - CPEDID Command Type - EDID Handling
Command Name Permission Transparency
Set: CPEDID End User Public
Get: - - -
Description Syntax
Set:
Copy EDID data from the output to
the input EEPROM # CPEDID
␠
src_type, src_id, dst_type,
dest_bitmap
␍
Get: - -
Response
~nn@ CPEDID
␠
src_stg, src_id, dst_type, dest_bitmap
␍␊
Parameters
src_type - EDID source type (usually output) (see Section
‎18.16 EDID Source
)
src_id - number of chosen source stage (1.. max number of inputs/outputs)
dst_type - EDID destination type (usually input) (see Section
‎18.16 EDID Source
)
dest_bitmap -
bitmap representing destination IDs. Format: XXXX…X, where X is hex digit. The binary
form of every hex di
git represents corresponding destinations. Setting ‘1’ says that EDID data has to be
copied to this destination
Response Triggers
Response is sent to the com port from which the Set was received (before execution)
Notes
Destination bitmap size depends on device properties (for 64 inputs it is a 64-bit word)
Example: bitmap 0x0013 means inputs 1,2 and 5 are loaded with the new EDID