VS-62HA - Operating the VS-62HA Remotely via the Web Pages
31
#
Item
Description
1
AFV from Analog
Click to enable audio-follow-video mode. Analog
audio from a selected video input is routed to output
1 or 2 as chosen. In this case the front panel
ANALOG button lights green.
2
AFV from HDMI
Click to enable audio-follow-video mode. HDMI audio
from a selected video input is routed to output 1 or 2
as chosen. In this case the front panel ANALOG
button is not lit.
3
Input Buttons 1 to 6
Click to select analog audio input. Breakaway mode
is enabled. The front panel ANALOG button lights
red.
4
Show/Hide Panel
Click to show or hide the Web page panel
5
Connection Indicator
Lights green when connected, grey when off
6
Web Page Selector
Click to show the desired Web page
7
Output Buttons 1 and 2
2 buttons to select the output (highlighted when
selected)
8
Swap Audio Outputs
Click to swap Out 1 to Out 2 and Out 2 to Out 1, click
again to return to the original state. When swap is
active, the button lights
9
Selection Indicator
Lights green when selected
10
OUT Volume Slider 1 and 2
Click and drag the purple slider to the desired volume
level. Click above or below the slider to increase or
decrease the setting by 10dB. The set level shows at
the bottom of the slider
11
Security Icon
Open lock indicates security not active, closed lock
indicates active security (set security on the
Authentication tab)
12
Full Screen Icon
Click to toggle full screen on/off
13
Mute/Unmute Output
Click to turn audio off/on
9.3
EDID Management
The
VS-62HA
EDID page lets you copy EDID data to one or more Inputs from
an:
Output
Input
Default EDID
EDID data file
The following illustration explains the elements of the video switching page.
Note
: Most elements have tool tips that appear when the element is touched.
