91
5
© 2017 KOSTAL Solar Electric GmbH
Webserver
n
Portal configuration
Enter the solar portal configuration. If you want to use
a solar portal, the log data and events can be sent to
the solar portal.
Menu item
Function
Portal code
Input box for the portal code of a
solar portal (e.g. PIKO Solar Portal
- P3421).
Active portal
Display of the active portal.
Last portal connection
Displays how many minutes ago the
inverter last transferred data to the
solar portal (when the function is
active).
Data export
Removal of the "check" deactivates
sending to the solar portal.
n
Data logger
Choose from a saving interval of 5, 15 or 60 minutes.
n
Overvoltage protection
If overvoltage protection was fitted on the AC or DC
side, it can be activated or deactivated here. If an
overvoltage protection module on the AC or DC side
fails, an event about is issued about this. For more
information, see
n
Plant configuration
This function is not supported by this device.
n
Switched output
This function is not supported by this device.
INFO
The solar portal can only be used for
inverters which are connected directly
to the Internet or connected with one
another by means of the Ethernet
(LAN).
INFO
When 5 minutes is selected, the data
can be saved for approximately 130
days. When 15 minutes is selected,
the data can be saved for approxi-
mately 400 days. When 60 minutes is
selected, the data can be saved for
approximately 1500 days. When the
internal memory is full, the oldest data
will be overwritten.
2
3
4
6
7
8
9
10
11
1
5
