67
4
© 2017 KOSTAL Solar Electric GmbH
Operation and operating the device
Using the inverter's service menu, the installer can per-
form settings on the inverter, which are not available to
the normal user.
In order that the service menu and other service settings,
that only an installer can make, are displayed in the com-
munication board, the installer must request a code via
the inverter manufacturer's service.
The code is entered by going to the following menu item:
Settings > Service menu > Service code
Once the service code has been entered and confirmed,
the additional service menu entries appear.
Below you will find a description of the functions and set-
tings available:
Service menu entry
Description
Service code
Input of service code and enabling of
additional menu items.
Reset web login
(possible without service
code)
Reset Webserver login to default
values.
Default values for Webserver login:
User
"pvserver"
Password
"pvwr"
Overvoltage protection
(possible without service
code)
Activate overvoltage protection for
AC and/or DC. This must be installed
in the inverter in advance.
Factory setting
(possible without service
code)
Reset inverter to factory setting. All
settings are deleted apart from the
country setting.
Country setting
Reset the country setting. Once the
reset is complete, the inverter reports
back with the country setting.
INFO
The service menu entries depend on
the installed inverter firmware (FW)
and the communication board soft-
ware (UI) and may deviate from the
description provided here.
4.8 The service menu
2
3
4
6
7
8
9
10
11
1
5
