manualshive.com logo in svg

Kostal PIKO 36 EPC, Operating Manual

Share
Download
Kostal PIKO 36 EPC Operating Manual Download Page 115

115

8

© 2017 KOSTAL Solar Electric GmbH

 

Maintenance

6. 

Clean fan and housing opening with a soft brush.

7. 

Pay attention to the following when installing: 
- The cable must point into the housing. 
- The cable is secured in the device with the cable 
guides.

 

- The cable of the fan must not be crushed. 
- The fan must be correctly installed in the fan  
frame (air flow direction).   

Fig. 61

Fig. 61: Fan installation

8. 

Reconnect the fan cable and insert the fan into the 
housing. When switching on for the first time, check 
whether the air from the fan is drawn inwards.

9. 

Start up the inverter   

Ch. 4.1

IMPORTANT 
INFORMATION

When installing the fan ensure that 
the cables are laid and refastened 
so that they do not run into the fan. 
If this is not done, the fan may fail 
or noise may result.

Fasten fan cables with the cable 
guides intended for this purpose 
inside the housing.

2

3

4

6

7

8

9

10

11

1

5

Summary of Contents for PIKO 36 EPC



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands