Korg Pa3XLe, User Manual, Page: 130 / 472

126 Style Play
Track Controls > Easy Edit
4.
If you like, choose the “Solo Track” command from the
page menu to solo the Drum track.
5.
While listening to the Style, select the Snare family, then
select the Volume parameter, and use the VALUE DIAL to
turn the volume completely off.
You’ll notice how all snares stops sounding.
6.
Touch the Reset Track button in the display to recall the
original Snare’s volume.
Track Controls > Easy Edit
In this page you can edit the main parameters of the Sounds
assigned to each track.
Hint:
Use the TRACK SELECT button to cycle between the track
groups. After selecting a track, choose the “Solo Track” command
from the page menu to avoid listening to the other tracks during
editing.
Note: All values are offsets referred to the value of the original
Sound.
Easy Sound Edit parameters
Use these knobs to adjust the offset value.
-64…0…+63 Offset value. ‘0’ means no change to the original value
memorized in the Sound, while any other value
means a decrease or increase to the original value.
Portamento knob and switch
Use the Time knob to adjust the speed of the portamento (a slide
between notes). Check the box to turn portamento on, or
uncheck it to turn portamento off.
Select
Use these buttons to select the track to edit. The button corre-
sponding to the selected track turns green.
Reset Track
Touch this button to reset all changes to Sound parameters in the
selected track.
Reset All Tracks
Touch this button to reset all changes to Sound parameters in all
tracks.
Play/Mute icon
Track’s play/mute status.
Play status. The track can be heard.
Mute status. The track cannot be heard.
How to adjust sound parameters for a single
Sound
Here is a quick example of the use of the Easy Sound Edit func-
tion.
1.
If needed, while in this page press TRACK SELECT to see
Keyboard tracks.
2.
Touch the “Select” button, in the display, corresponding to
the Upper 1 track.
3.
While playing on the keyboard to hear the Sound, select
the Cutoff knob, and use the VALUE DIAL to turn its value
completely off.
You’ll notice how the filter progressively cuts out high fre-
quencies, making the sound darker and mellower.
4. Touch the Reset Track button in the display to recall the
original Cutoff value (the shown Easy Edit value is ‘0’).
Sound parameters Meaning
Attack Attack time. This is the time during which the sound
goes from zero (at the moment when you strike a
key) to it’s maximum level.
Decay Decay time. Time to go from the final Attack level to
the beginning of the Sustain.
Release Release time. This is the time during which the
sound goes from the sustaining phase, to zero. The
Release is triggered by releasing a key.
Cutoff Filter cutoff. This sets the sound brightness.
Resonance Use the Filter Resonance to boost the cutoff fre-
quency.
LFO Depth Intensity of the Vibrato (LFO).
LFO Speed Speed of the Vibrato (LFO).
LFO Delay Delay time before the Vibrato (LFO) begins, after the
sound starts.
Pa3XLe User Manual v100 (English).book Page 126 Thursday, May 29, 2014 5:42 PM