Korg opsix, Owner'S Manual, Page: 67 / 105

67
PROG MISC (Program Misc)
LEVEL (Program Level)
Sets the volume for the entire program. The result will be applied to the effect output.
ALG FB (Algorithm FB)
Aside from the user algorithms, feedback algorithms are connected like a feedback loop that sends
signals upwards through the algorithm. (ALGO X, X, .. X) This parameter sets the signal level that
flows through the feedback loop. The feedback loop is picked up following the LEVEL (Program
Level) of the Operator, which lets you use the changes in LEVEL (Program Level) to affect the
feedback as well, creating complex effects.
PHASE (OSC Phase)
This sets this oscillator’s phase for each note-on as follows.
SYNC:
Sets the oscillator phase to “0”.
FREE:
Sets the value for all oscillators to the same random value.
RANDOM:
Sets and changes the value for each oscillator’s phase randomly.
LOFI (LoFi)
When this is turned on, the oscillator waveform and level control signals are tuned more roughly,
creating a slightly noisy sound that is like an older digital synth.
USER ALG (User Algorithm)
Select this page and press the YES button to edit the user algorithms. Go to a different page to finish
editing.